Kawasaki Mule Pro – MX Utility Vehicle
BUILT STRONG TO WORK HARD

Delivering all the rugged, reliable and adaptable attributes that Kawasaki’s MULE utility vehicle brand is justifiably famous for, the new Kawasaki MULE PRO-MX range for 2020 relies not only on a torque laden 700cc CVT single-cylinder equipped engine but also benefits from the Shinari design philosophy.

Kawasaki Mule Pro MX

.

The Kawasaki MULE PRO MX Key Features

The new Kawasaki MULE PRO-MX range for 2020 has key features unlike any other utility vehicle and relies not only on a torque laden 700cc CVT single-cylinder equipped engine but also benefits from the Shinari design philosophy.

Short Turning Radius
the MULE PRO-MX has a short 4.2 m (13.8 ft) turning radius making it easier to negotiate tight corners in the woods or on trail courses.

EPS & Tilt-Adjustable Steering Wheel
Kawasaki’s high-grade electric power steering (EPS) system is speed sensitive, offering light steering at low speed, while reducing assistance as vehicle speed increases to tighten up the steering. It also enhances ride comfort and control by acting as damping system, reducing bump steer and kickback to the steering wheel caused by shocks to the wheels.

Drivers can set the position of the tilt-adjustable steering wheel to suit their preference, as well as lift it out of the way to facilitate getting in and out of the vehicle.

Contoured Bench Seat: Roomy Seating for Two
Complementing ample shoulder, knee and legroom for two adults, the bench seat features contoured seating for both driver and passenger, contributing to the PRO-MX’s superb comfort.

700cc Single-Cylinder Engine
In addition to offering plenty of towing and carrying capacity for hauling cargo at work or outdoor supplies for weekend fun, the highly reliable fuelinjected 700cc single-cylinder engine’s superior torque contributes to a fun-to-drive character and facilitates lowspeed operation.

Electric Power Steering
Kawasaki’s highgrade electric power steering (EPS) system works best when you need it most: at extremely slow speed and when stopped. Turning the wheel causes a signal to be sent to the EPS ECU, initiating assistance. The ECU uses input from a vehicle speed sensor and torque sensor to determine the amount of steering assistance required from the system’s electric motor. At slow speed or when stopped, assistance is greatest; assistance is reduced as vehicle speed increases, tightening up the steering.

“Just Right” Size
Measuring 2,795 mm (110”) long and 1,525 mm (60”) wide, with a 2,005 mm (79”) wheelbase, the PRO-MX’s midsize package offers mobility and manoeuvrability that facilitate negotiating tight trails, while capably providing the carrying performance to make chores a breeze, or haul gear for a weekend in the Great Outdoors.

Storage bin
Storage bin (5.3 litres) located under the passenger’s seat offers convenient storage. A steel plate protects the storage bin from rock strikes.

Digital Instrumentation
A multi-function display is built into the dash. Features include:    driving mode (2WD/4WD) indicator    digital speedometer    digital fuel gauge    clock    odometer dual trip meters    hour meter    differential indicator lamp    engine check lamp    EPS warning lamp    water temperature warning lamp    seatbelt warning lamp parking indicator lamp    reverse indicator lamp    neutral indicator lamp

Shinari-Tuned Frame
Shinari is a Japanese term that describes the elasticity that enables an object to bend without breaking and return to its original shape – similar to how a hunting bow or fishing pole behaves. Tuned for the ideal shinari characteristics, the PRO-MX’s rugged frame construction benefits not only durability, but handling and ride comfort as well.

Steel Parts
In addition to the PRO Series-style steel bumper, a conscious choice to use steel parts for areas like the diamond-plate cargo bed and floorboards contribute to the PRO-MX’s tough image, and reflect its strong build.

Towing Capacity
The PROMX has a 680 kg (1,500 lbs) towing capacity. Standard 2” tow hitch receiver is compatible with a wide range of accessory hitches.

Beefy 25” Tyres
The MULE PRO-MX is equipped with 25” tyres on 12” rims. The large 25” radial tyres provide great off-road traction, ensure ample ground clearance and complement the rugged styling.

Digital Instrumentation
A multi-function display is built into the dash. Features include:    driving mode (2WD/4WD) indicator    digital speedometer    digital fuel gauge    clock    odometer dual trip meters    hour meter    differential indicator lamp    engine check lamp    EPS warning lamp    water temperature warning lamp    seatbelt warning lamp parking indicator lamp    reverse indicator lamp    neutral indicator lamp

Shinari-Tuned Frame
Shinari is a Japanese term that describes the elasticity that enables an object to bend without breaking and return to its original shape – similar to how a hunting bow or fishing pole behaves. Tuned for the ideal shinari characteristics, the PRO-MX’s rugged frame construction benefits not only durability, but handling and ride comfort as well.

Steel Parts
In addition to the PRO Series-style steel bumper, a conscious choice to use steel parts for areas like the diamond-plate cargo bed and floorboards contribute to the PRO-MX’s tough image, and reflect its strong build.

Towing Capacity
The PROMX has a 680 kg (1,500 lbs) towing capacity. Standard 2” tow hitch receiver is compatible with a wide range of accessory hitches.

Beefy 25” Tyres
The MULE PRO-MX is equipped with 25” tyres on 12” rims. The large 25” radial tyres provide great off-road traction, ensure ample ground clearance and complement the rugged styling.

Electrically Selectable 4WD & Rear Differential Lock
Electrically “selectable” 1 2WD/4WD and dualmode rear differential system allow easy changing between drive systems to suit changing terrain and applications.

Automotive Dashboard Design
Like on the MULE PRO Series flagship models, an automotive-style dashboard puts all controls within easy reach. Digital instrumentation provides at-a-glance information. And the centre console comes prepped for an accessory audio system.

Doors Standard
Like all the MULE PRO Series models, the PRO-MX comes standard with doors, offering a level of mud protection while facilitating getting in and out of the vehicle.

Strong, Reliable Brakes
Front and rear disc brakes ensure strong, sure stopping power – especially when combined with the engine braking. The hydraulic disc system offers predictable performance, delivering brake power that matches input at the brake pedal.

Independent Front & Rear Suspension
Double-wishbone suspension is used both front and rear to enable each of the wheels to drive over obstacles with minimum effect on the chassis.

Kawasaki Mule Pro MX

Kawasaki Mule Pro MX

Call 01403 273 444 and arrange a free demonstration

Discover more

MACHINE TECHNICAL SPECIFICATIONS

Engine

  • Engine type: Liquid-cooled, 4-stroke Single
  • Displacement: 695 cm³
  • Bore x stroke: 102 x 85 mm
  • Compression ratio: 10.3:1
  • Fuel system: Fuel injection: Ø44 mm x 1 throttle body
  • Ignition: Magneto & transistor
  • Starting System: Electric
  • Lubrication: Forced lubrication, wet sump

Performance & Transmission

  • Maximum power: 32.8 kW {45 PS} / 6,000 rpm
  • Maximum torque: 57.6 N•m {5.8 kgf•m} / 5,000 rpm
  • Transmission: CVT, 2 speed auto, reverse
  • Final drive: Shaft 2WD/4WD
  • Primary Reduction Ratio: 3.653 ~ 0.794 (belt converter)

Brakes & Suspension

  • Brakes, front: Dual 186 mm discs
  • Brakes, rear: Dual 174 mm discs
  • Suspension, front: Double Wishbone
  • Suspension, rear: Double Wishbone

Frame & Dimensions

  • Frame type: Ladder type, tubular steel
  • Wheel travel front: 218 mm
  • Wheel travel rear: 232 mm
  • Tyre, front: 25 x 8.00 R12
  • Tyre, rear: 25 x 10.00 R12
  • Steering angle, left / right: 43o (IN) / 38o (OUT)
  • L x W x H: 2,795 x 1,525 x 1,890 mm
  • Wheelbase: 2,005 mm
  • Ground clearance: 270 mm
  • Fuel capacity: 36 litres
  • Seat height: 850 mm
  • Curb mass: 719 kg
WHAT NEXT? ARRANGE A FREE ON-SITE SURVEY & DEMO

Arrange a on-site survey and demonstration

The next step is to contact our sales team who will arrange a mutually convenient time for a demonstration on your site and application area you would like to test it on. 

Call 01403 273 444 to speak to one of our sales team

FINANCE & LEASING OPTIONS ON THIS MACHINE

Manage your business through finance and leasing option

Trafalgar Cleaning Equipment offers flexible leasing options for financing products. Get in touch and we will advise you free of charge and without obligation. We are your reliable partner when it comes to leasing that is individually tailored to suit your needs. 

Good reasons for lease financing:

Invest without using company capital

You do not have to use any capital that you need for your own resources to purchase your new equipment. This gives you more room for manoeuvre in your business.

Earn more by leasing

Generate profit without using company capital. There's no better way to make money. What are you waiting for?

No need to go to your bank

Invest without having to commit to a bank loan. Your securities will remain available for other financing projects*.

Safe and manageable

Lease instalments remain the same for the entire term of the lease. This gives you a clear planning structure.

Call 01403 273 444 to speak to one of our sales team

WARRANTY SERVICING & MAITENANCE

All of the machines we sell come with a warranty, please ask your salesman for more details. We also offer service contracts on all of the machines we sell, please discuss this with your salesman at the time of purchase for more details and prices. Maintenance of your machine will be imperative to the machines longevity in service, so regular maintenance and servicing of your machine is always recommended.

ON-SITE INSTALLATION & TRAINING

All of the machines we sell are pre-assembled, tested, and pre-run by our engineers before leaving the workshop for dispatch or delivery by your salesman. We do this so that when you receive your machine it is ready to go. Some of our machines do require onsite training and this will be explained and arranged if required at the time of sale by your salesman who will provide you with the required training to operate your new machine.

.

MACHINE FOR HIRETHIS MACHINE IS AVAILABLE FOR SHORT TERM or LONG TERM HIRE

. Speak to our experienced sales team today. Call 01403 273 444

MACHINE FREE DEMOBOOK A FREE ON-SITE SURVEY AND MACHINE DEMONSTRATION

. Book a free site survey and demo today. Or Call 01403 273 444