Kawasaki Mule Pro-DX Utility Vehicle
BUILT STRONG TO WORK HARD

The Kawasaki Mule Pro-DX is the utility vehicle of choice for many professionals such as farmers, gamekeepers  and grounds-care experts. The Mule Pro DX is at the top of the Kawasaki MULE series.

​​Kawasaki Mule Pro-DX Utility Vehicle

.

The Kawasaki Mule Pro-DX Utility Vehicle

The utility vehicle of choice for many professionals such as farmers, gamekeepers  and grounds-care experts. The Mule Pro DX is at the top of the Kawasaki MULE series.

CARGO BED

LARGEST IN CLASS
Ability to get the job done means flat-loading an entire wooden pallet onto the massive steel-based cargo bed, towing up to 2,000 lbs., hauling up to 1,000 lbs., and much, much more.

MOVE MORE
Massive 20 square-foot cargo bed with 1,000-lbs. capacity easily fits a standard wooden pallet allowing you to transport more with each load.

BUILT DEPENDABLE
Steel-based cargo bed is built with enhanced durability while KQR™ cargo bed rails feature quick release capabilities.

GET WORK DONE
Two-inch hitch receiver with massive 2,000-lbs towing capacity helps you get the job done faster with less effort.

POWER

SPEED & STRENGTH
993cc, three-cylinder diesel engine with massive torque packs impressive pulling power for hauling and towing heavy loads across challenging terrain.

SMOOTH TRANSITION
Dash-mounted 2WD/4WD and rear differential lock final drive selection switches allow you to easily and instantly optimize traction to match terrain conditions.

EXCELS UNDER PRESSURE
Engine torque and power are matched to the Continuously Variable Transmission (CVT) to offer usable power delivery throughout the rpm range to get you through those tough spots even when loaded to capacity.

DESCEND WITH CONFIDENCE
Continuously Variable Transmission (CVT) also contributes to smooth, consistent engine braking that helps to maintain reduced vehicle speed during descents.

DURABILITY

BUILT STRONG
MULE PRO-DX™ EPS side x sides are strong where they need to be and flexible where it matters. Solid construction features a steel front bumper, steel diamond-plate cargo bed floor and floorboards for optimal durability.

HEAVY-DUTY PROTECTION
All-steel front bumper provides protection for your bodywork.

DESIGNED STRONG
Ladder-type construction of the welded main frame optimizes flex, rigidity and strength while intelligent design features help protect vital components.

PROTECTION FROM DEBRIS
Drive through rugged terrain in confidence as integrated inner wheel wells help protect the engine compartment from outside water, dust and debris.

COMFORT

ROOM TO RIDE
Drive comfortably in a roomy cabin that offers generous leg, shoulder, and head clearance, along with refined ergonomics.

SMOOTH RIDE
Independent front and rear suspension contribute to a smooth, comfortable ride while twin-tube shock absorbers provide superior bump absorption in rough low speed situations as well as dampening higher-speed chatter.

PRECISE & EFFORTLESS
Speed-sensitive Electric Power Steering (EPS) technology provides all-day comfort and reduces driver fatigue by easing steering effort. Steering remains light and precise with minimal kickback. Adjustable tilt steering wheel comes standard.

ROOMY & COMFORTABLE
The cabin features a padded bench seat that fits three adults comfortably with generous shoulder and leg room. Automotive-style 3-point seatbelts are comfortable and easy to use. The 12-gallon storage bin located under the seat provides convenient item storage.

Kawasaki Mule Pro DX

Kawasaki Mule Pro DX

Call 01403 273 444 and arrange a free demonstration

Discover more

MACHINE TECHNICAL SPECIFICATIONS

Engine

  • Engine type: Liquid-cooled, 4-stroke Diesel, 3-cylinder OHV
  • Displacement: 993 cm³
  • Bore x stroke: 74 x 77 mm
  • Compression ratio: 23.5:1
  • Fuel system: In-line injection pump
  • Starting System: Electric
  • Lubrication: Forced lubrication, wet sump

Performance & Transmission

  • Maximum power: 17.8 kW {24 PS} / 3,600 rpm
  • Maximum torque: 52.1 N•m {5.3 kgf•m} / 2,400 rpm
  • Transmission: CVT, 2-speed auto, reverse
  • Final drive: 2WD / 4WD, shaft, Dual-Mode Differential
  • Primary Reduction Ratio: 3.334 ~ 0.756 (belt converter)
  • Final reduction ratio: Front:6.382 (31/17 x 35/10) - Rear:6.245 (31/21 x 55/13)

Brakes & Suspension

  • Brakes, front: Dual 212 mm discs with 2-piston calipers
  • Brakes, rear: Dual 212 mm discs with 1-piston calipers
  • Suspension, front: Double wishbone
  • Suspension, rear: Double wishbone

Frame & Dimensions

  • Frame type: Ladder type, tubular steel
  • Wheel travel front: 222 mm
  • Wheel travel rear: (left) 217 mm , (right) 220 mm
  • Tyre, front: 26 x 9.00-12 4PR
  • Tyre, rear: 26 x 11.00-12 4PR
  • L x W x H: 3,385 x 1,625 x 1,965 mm
  • Wheelbase: 2,345 mm
  • Ground clearance: 265 mm
  • Fuel capacity: 30 litres
  • Seat height: 885 mm
  • Curb mass: 842 kg
WHAT NEXT? ARRANGE A FREE ON-SITE SURVEY & DEMO

Arrange a on-site survey and demonstration

The next step is to contact our sales team who will arrange a mutually convenient time for a demonstration on your site and application area you would like to test it on. 

Call 01403 273 444 to speak to one of our sales team

FINANCE & LEASING OPTIONS ON THIS MACHINE

Manage your business through finance and leasing option

Trafalgar Cleaning Equipment offers flexible leasing options for financing products. Get in touch and we will advise you free of charge and without obligation. We are your reliable partner when it comes to leasing that is individually tailored to suit your needs. 

Good reasons for lease financing:

Invest without using company capital

You do not have to use any capital that you need for your own resources to purchase your new equipment. This gives you more room for manoeuvre in your business.

Earn more by leasing

Generate profit without using company capital. There's no better way to make money. What are you waiting for?

No need to go to your bank

Invest without having to commit to a bank loan. Your securities will remain available for other financing projects*.

Safe and manageable

Lease instalments remain the same for the entire term of the lease. This gives you a clear planning structure.

Call 01403 273 444 to speak to one of our sales team

WARRANTY SERVICING & MAITENANCE

All of the machines we sell come with a warranty, please ask your salesman for more details. We also offer service contracts on all of the machines we sell, please discuss this with your salesman at the time of purchase for more details and prices. Maintenance of your machine will be imperative to the machines longevity in service, so regular maintenance and servicing of your machine is always recommended.

ON-SITE INSTALLATION & TRAINING

All of the machines we sell are pre-assembled, tested, and pre-run by our engineers before leaving the workshop for dispatch or delivery by your salesman. We do this so that when you receive your machine it is ready to go. Some of our machines do require onsite training and this will be explained and arranged if required at the time of sale by your salesman who will provide you with the required training to operate your new machine.

.

MACHINE FOR HIRETHIS MACHINE IS AVAILABLE FOR SHORT TERM or LONG TERM HIRE

. Speak to our experienced sales team today. Call 01403 273 444

MACHINE FREE DEMOBOOK A FREE ON-SITE SURVEY AND MACHINE DEMONSTRATION

. Book a free site survey and demo today. Or Call 01403 273 444