Skip to main content

Kawasaki Mule Pro-DTX Utility Vehicle

Kawasaki Mule Pro-DTX Utility Vehicle

The Kawasaki Mule Pro DTX is the utility vehicle of choice for many professionals such as farmers, gamekeepers  and grounds-care experts. The Pro DXT stands at the top of the Kawasaki MULE series.

Kawasaki Mule Pro DTX


The Kawasaki Mule Pro-DTX Utility Vehicle Key Features

The Kawasaki Mule Pro DTX is the utility vehicle of choice for many professionals such as farmers, gamekeepers and grounds-care experts. . The Mule Pro DTX is at the top of the Kawasaki MULE series.

Powerful 993 cm3 Diesel Engine
In addition to on-site fuel compatibility, the high-torque three-cylinder diesel engine of the MULE PRO-DXT and PRO-DX offers excellent performance for hauling loads, as well as easy low-speed control.  Vehicle top speed is up to 30 mph.

Simple, Rugged Styling
Designed to reflect their tough construction and strong performance, the MULE PRO-DXT and PRO-DX feature rugged, no-nonsense styling similar to that found on high-quality pickup trucks.

Gas-assisted tilting cargo bed.
Gas-assisted tilting cargo bed facilitates accessing the engine.

Digital Instrumentation
Multi-function display built into the dash is standard on all models.

Bright Headlights
Dual 55/60 W headlights and standard LED lights cut a bright path through the dark for clear visibility on night rides.

Cargo and Towing Capacity
The PRO-DXT also offers a spacious cargo bed. Cargo bed dimensions are 1,085 mm L x 1,363 mm W x 279 mm H in two-person mode, 560 mm x 1,363 mm x 279 mm in four-person mode.

One-minute, One-person Transformation
The Trans Cab system allows the MULE PRO-DXT to be transformed from four-person to two-person mode in less than a minute. The sliding cargo wall is integrated with the cargo bed making it possible for a single person to execute the transformation.

Room for two
Then slide the cargo wall forward; lower the cargo wall struts and reattached the seat latches to secure the cargo wall.

Tilt Steering
Steering wheel has a stepless adjustability range of approximately 34o, allowing drivers to set its position to suit their preference, as well as lift it out of the way to facilitate getting in and out of the vehicle.

Electric Power Steering
Kawasaki’s high-grade electric power steering (EPS) system works best when you need it most: at extremely slow speed and when stopped.

Electrically Selectable 4WD & Rear Differential Lock
Electrically “selectable” 2WD/4WD and dualmode rear differential system allow easy changing between drive systems to suit
changing terrain and applications.

Balanced Frame Stiffness
The rugged frame construction of the MULE PRO-DXT and PRO-DX ensures great durability as well as superb handling.

Hydraulic Disc Brakes
Front and rear disc brakes ensure strong, sure stopping power. The hydraulic disc system offers predictable performance, delivering brake power that matches input at the brake pedal.

Quick conversion
To transform from four-person mode to two-person mode, release the seat latches and lift the cargo wall struts to disengage the cargo wall securing mechanism; fold the seat bottom out of the way; slide the cargo wall forward; lower the cargo wall struts and reattached the seat latches to secure the cargo wall.

Stable, Wide-body Chassis
The MULE PRO-DXT and PRO-DX combine a wide-body chassis with a 2,345 mm wheelbase. This contributes to riding stability and comfort, while offering easy operability and manoeuvrability.

Room for four
Cargo bed side walls are hinged, allowing the front parts to fold out of the way when the cargo wall slides into its rearward position.

Kawasaki Mule Pro DTX

Call 01403 273 444 and arrange a free demonstration

Discover more



  • Engine type: Liquid-cooled, 4-stroke Diesel, 3-cylinder OHV
  • Compression ratio: 23.5:1
  • Bore x stroke: 74 x 77 mm
  • Displacement: 993 cm³
  • Fuel system: In-line injection pump
  • Starting System: Electric
  • Combustion Chamber: Swirl Chamber
  • Lubrication: Forced lubrication, wet sump

Performance & Transmission

  • Maximum torque: 52.1 N•m {5.3 kgf•m} / 2,400 rpm
  • Maximum power: 17.8 kW {24 PS} / 3,600 rpm
  • Transmission: CVT, 2-speed auto, reverse
  • Primary Reduction Ratio: 3.334 ~ 0.756 (belt converter)
  • Primary drive: Belt converter
  • Gear Ratio Forward: High:1.952 (34/33 x 36/19) - Low:3.876 (45/22 x 36/19)
  • Final Reduction Ratio: Front:6.382 (31/17 x 35/10) - Rear:6.245 (31/21 x 55/13)
  • Final drive: 2WD / 4WD, shaft, Dual-Mode Differential 

Brakes & Suspension

  • Parking Brake: Dual discs (mechanical)
  • Brakes, front: Dual 212 mm discs with 2-piston calipers
  • Brakes, rear: Dual 212 mm discs with 1-piston calipers
  • Suspension, front: Double wishbone
  • Suspension, rear: Double wishbone 

Frame & Dimensions

  • Frame type\; Ladder type, tubular steel
  • Wheel travel front: 222 mm
  • Wheel travel rear: (left) 217 mm , (right) 220 mm
  • Tyre, front: 26 x 9.00-12 4PR
  • Tyre, rear: 26 x 11.00-12 4PR
  • Steering angle L/R: 40o (IN) / 31o (OUT), 40o (IN) / 31o (OUT)
  • L x W x H: 3,385 x 1,625 x 1,970 mm
  • Wheelbase: 2,345 mm
  • Ground clearance: 260 mm
  • Fuel capacity: 30 litres
  • Seat height: 880 mm
  • Curb mass: 880 kg

Arrange a on-site survey and demonstration

The next step is to contact our sales team who will arrange a mutually convenient time for a demonstration on your site and application area you would like to test it on. 

Call 01403 273 444 to speak to one of our sales team


Manage your business through finance and leasing option

Trafalgar Cleaning Equipment offers flexible leasing options for financing products. Get in touch and we will advise you free of charge and without obligation. We are your reliable partner when it comes to leasing that is individually tailored to suit your needs. 

Good reasons for lease financing:

Invest without using company capital

You do not have to use any capital that you need for your own resources to purchase your new equipment. This gives you more room for manoeuvre in your business.

Earn more by leasing

Generate profit without using company capital. There's no better way to make money. What are you waiting for?

No need to go to your bank

Invest without having to commit to a bank loan. Your securities will remain available for other financing projects*.

Safe and manageable

Lease instalments remain the same for the entire term of the lease. This gives you a clear planning structure.

Call 01403 273 444 to speak to one of our sales team


All of the machines we sell come with a warranty, please ask your salesman for more details. We also offer service contracts on all of the machines we sell, please discuss this with your salesman at the time of purchase for more details and prices. Maintenance of your machine will be imperative to the machines longevity in service, so regular maintenance and servicing of your machine is always recommended.


All of the machines we sell are pre-assembled, tested, and pre-run by our engineers before leaving the workshop for dispatch or delivery by your salesman. We do this so that when you receive your machine it is ready to go. Some of our machines do require onsite training and this will be explained and arranged if required at the time of sale by your salesman who will provide you with the required training to operate your new machine.


1-3 Working Days Delivery
on all orders 

Call 01403 273 444
for Expert Advice and Support